Wondows Crash - hal.dll (hal+0x12A3B)

Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Wed 6.4.2016. 15:22:19 GMT your computer crashed
crash dump file: C:\Windows\Minidump\040616-45411-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8008B63028, 0xBE000000, 0x800400)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

 

 

https://gyazo.com/ecf9c305ea425d21c1c343c4e76c41c3

 

Ima tko neke ideje? Windows reinstall?

Nedugo sam ukopčao dodatni monitor. Jedina promjena. I animio sam nove drivere jučer. I hangali su mi na pola (jer ih je AVG bloko). Restarto PC i onda sam ponovo snimio driver.

 

asrock z68 extreme3 gen3

i5 2500k

550W VX

r9 290

8gb ram (2x4) kingston 1600mhz CL9

 

 

Tnx.

Sorry 280. Krivo sam napiso. R9 280 imam. Sad sam rastavio pc i počistio. Trebo bi pastu zamjenit možda al mi se neda. Imam nove rame koje bi sad stavio. 4x8gb kingston 1800mhz cl10. Mogu na napajanje to?

Znači prije malo manje tj dana novi 32 benq monitor na acer gl257hlbidx i jučer driveri ali prvi puta freeze na 50% pa restarto i ispočetka jer je avg bloko inatalaciju. Mogu u safe mode driver unistaller i nanovo drivere. Za opterećenjr javim kad testiram. Samo me zanima jel safe da stavim nove rame. Stalno mislim da ne budem imo dosta psu.
Tnx!

Nisam ništa novo sastavljao. Dugo već radilo sve. Ok onda budem ostavio stari ram. Mislim si da je možda ram jer mi se zna brzo zapunit. Na 6-7 gb. Mislim ili ram ili windows.

Znači jedan put se dogodilo i više nije? Ali što si radio tada na računalu kada se pojavio? Tako se meni prije koji mjesec pojavio BSOD i više nije od tada, a ni prije toga (na ovome novom računalu). I pustio sam. Rekao sam sebi ako se ponovi, onda imam problem, ali nije i sve radi odlično tako da se ne brinem.

I 3d studio max mi je bio upaljen isto tako da je to još uzimalo ram.