Program za test optičkog pogona?

dali postoji i molio bi link.

Naime radi se o sporoj instalaciji windowsa 7 i viste znaci bilo koji sistem kad zelim staviti instalira mi jako dugo,47 posto za  4 i pol sata.probao sam tonu cd dok ti ostali cd-i rade kod kolege normalno kod mene ne.testao sam hard i sve je uredu nema ni jedne greske zato pitam vas dali ima neki program da testam čitać?

Rezultati..Testao sam dali je ovo dokaz da je meni tako sporo instalirao windows 7.testao sam hard nema nikakvih gresaka tako da je on otpao...Ili da sam sebe obradujem i da si kupim novi čitać i usput mozete mi predložit neke....

U "div.menageru" provjeri da ti optički pogon nije u PIO modu.. pa prebaci u DMA...

1. Najprije u device manageru očitaj na kojem ti se IDE kanalu nalazi optički pogon (slika 1)

2. Na IDE kanalu koji si očitao pročitaj current mode pogona i eventualno omogući DMA mode ukoliko nije trenutni režim rada taj (slika 2)

Ako ti kojim slučajem windows vrati DMA mod ponovno na PIO ovo ti je VBA skripta kojim ćeš resetirati postavke na DMA:

1. Kopiraj kod u Notepad i sa save as sačuvaj skriptu npr. kao dmareset.vbs

2. Pokreni skriptu, nakon toga resetiraj komp  

 

 

' Visual Basic Script program to reset the DMA status of all ATA drives

' Copyright © 2006 Hans-Georg Michna

' Version 2007-04-04

' Works in Windows XP, probably also in Windows 2000 and NT.
' Does no harm if Windows version is incompatible.

If MsgBox("This program will now reset the DMA status of all ATA drives with Windows drivers." _
& vbNewline & "Windows will redetect the status after the next reboot, therefore this procedure" _
& vbNewline & "should be harmless.", _
vbOkCancel, "Program start message") _
= vbOk Then

RegPath = "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\"
ValueName1Master = "MasterIdDataChecksum"
ValueName1Slave = "SlaveIdDataChecksum"
ValueName2Master = "UserMasterDeviceTimingModeAllowed"
ValueName2Slave = "UserSlaveDeviceTimingModeAllowed"
ValueName3 = "ResetErrorCountersOnSuccess"
MessageText = "The following ATA channels have been reset:"
MessageTextLen0 = Len(MessageText)
ConsecutiveMisses = 0
Set WshShell = WScript.CreateObject("WScript.Shell")

For i = 0 to 999
RegSubPath = Right("000" & i, 4) & "\"

' Master

Err.Clear
On Error Resume Next
WshShell.RegRead RegPath & RegSubPath & ValueName1Master
errMaster = Err.Number
On Error Goto 0
If errMaster = 0 Then
On Error Resume Next
WshShell.RegDelete RegPath & RegSubPath & ValueName1Master
WshShell.RegDelete RegPath & RegSubPath & ValueName2Master
On Error Goto 0
MessageText = MessageText & vbNewLine & "Master"
End If

' Slave

Err.Clear
On Error Resume Next
WshShell.RegRead RegPath & RegSubPath & ValueName1Slave
errSlave = Err.Number
On Error Goto 0
If errSlave = 0 Then
On Error Resume Next
WshShell.RegDelete RegPath & RegSubPath & ValueName1Slave
WshShell.RegDelete RegPath & RegSubPath & ValueName2Slave
On Error Goto 0
If errMaster = 0 Then
MessageText = MessageText & " and "
Else
MessageText = MessageText & vbNewLine
End If
MessageText = MessageText & "Slave"
End If

If errMaster = 0 Or errSlave = 0 Then
On Error Resume Next
WshShell.RegWrite RegPath & RegSubPath & ValueName3, 1, "REG_DWORD"
On Error Goto 0
ChannelName = "unnamed channel " & Left(RegSubPath, 4)
On Error Resume Next
ChannelName = WshShell.RegRead(RegPath & RegSubPath & "DriverDesc")
On Error Goto 0
MessageText = MessageText & " of " & ChannelName & ";"
ConsecutiveMisses = 0
Else
ConsecutiveMisses = ConsecutiveMisses + 1
If ConsecutiveMisses >= 32 Then Exit For ' Don't search unnecessarily long.
End If
Next ' i

If Len(MessageText) <= MessageTextLen0 Then
MessageText = "No resettable ATA channels with Windows drivers found. Nothing changed."
Else
MessageText = MessageText & vbNewline _
& "Please reboot now to reset and redetect the DMA status."
End If

MsgBox MessageText, vbOkOnly, "Program finished normally"

End If ' MsgBox(...) = vbOk

' End of Visual Basic Script program

Jel ima neko određeno mjesto dje da spremim ili?

 

 

http://vemil.hr/opis.aspx?sifra=1160043

moj citac

Možda pomogne nešto iz ove teme?

Pet koraka za pomoć CD/DVD čitaću

 

Pržilica je u redu. Vjerojatno treba očistiti i staviti zadnji firmware.