USB Tipkovnica i BIOS

Uglavnom - imam tipkovnicu koja radi putem USB sučelja i skužio sam da nemogu kontrolirati kroz nju BIOS pošto se ne upali do tog tijeka paljenja računala.

E sad, zanima me kako omogućiti da odmah (kao što je to slučaj s PS2 tipkovnicama) ista odmah radi u POST-u?

Znam da je to do onih "Starih DOS" dana kada USB nije niti postojao ili je bio u začecima no ima li neka opcija u BIOS-u da uključim da se odmah upali i ova tipkovnica koja radi putem USB-a?

Hvala.

Pozz!

"Problem" je banalan...   Morat ćeš uzeti neku stariju tipkovnicu i uči u bios, pod menijem Integrated Peripherals pronaći opciju USB Keyboard Function te istu postaviti na Enabled,spremit postavke i to je to, sada bi i sa usb tipkovnicom trebao moći u bios bez problema...

Uživaj..!!  LP!

ovako imam jedan veliki problem tj. jako veliki

ps/2 utor sa tipkovnicu mi je pregorio a imam usb tipkovnicu koju mi komp neocitava kada rusim windowse i kako da sada namjestim ako je ikako moguce da mi komp ocita tu usb tipkovnicu i da srusim windows unaprijed hvala ;).

da ali koliko ja skuzio njemu je ps/2 zgorio na matičnoj a ne tipovnica

Logic mislim da njemu treba sa usb tipkovnice da pretvori u ps/2.

a ne iz ps/2 u usb

Ovo ti je link za usb instalaciju

http://www.collewijn.info/xpe/page/pe2usb.php

A ovo ti je link za insalaciju preko LAN mreze

http://support.microsoft.com/default.aspx?scid=kb;en-us;142857

Nadam se da će pomoći

A da,trebaće ti i ovo

Modifying the Startup Disk for Network Interface Cards

Modifying the Startup Disk for network interface cards (NIC) requires installing the appropriate MS-DOS driver and editing two system files.

•Install an NDIS2-compatible MS-DOS driver for the NIC. These are usually included with the floppy disk supplied by the manufacturer with their drivers. If no drivers are available, download the appropriate driver from the manufacturer's Web site.

Appropriate drivers for the Microsoft Network Client for MS-DOS will always have a .dos extension. For example, the driver for Intel's EtherExpress Pro/10 EISA is: Epro.dos

This driver should be placed in the Net directory on the computer (C:\Net, unless named differently) or on the MS-DOS startup disk (A:\Net).

•Modify the System.ini file. The NIC driver needs to be referenced in the System.ini file. This entry is found in the [network drivers] section, as illustrated below:

[network drivers]
netcard=elnkii.dos
transport=ndishlp.sys,*netbeui
devdir=A:\NET
LoadRMDrivers=yes
For "netcard=," replace the current driver with the file name of the NDIS2-compatible driver placed in the Net directory (for example, Epro.dos).

•Modify the Protocol.ini file. The NIC driver needs to be referenced in the Protocol.ini file. This entry is found in the [ms$ driver_name] section (the driver name will reflect what was originally chosen in the Network Installation Startup Disk process), as shown below:

[ms$elnkii]
drivername=ELNKII$
; INTERRUPT=3
; IOADDRESS=0x300
; DMACHANNEL=1
; MAXTRANSMITS=12

For "drivername=," replace the driver listed with the file name of the NDIS2-compatible driver; use a dollar sign ($) to replace the .dos file extension (for example, EPRO$).

Note: Do not change the header (for example, [ms$elnkii] in the example above); the header is a pointer throughout the .ini file.
Table of Contents

Additional TCP/IP Settings for the Microsoft Network Client for MS-DOS
Specifying WINS Servers

If your Microsoft Network Client for MS-DOS uses DHCP (the default setting for MS-DOS TCP/IP), it will automatically receive the address for the Windows Internet Naming Service (WINS) server. If you want to statically configure your WINS server IP address, you must edit the client's Protocol.ini file and add the IP address to the [TCPIP] section.

For example, if you have two WINS servers available, add them into the [TCPIP] section as shown in the example below. Note that there are no dots (.) in the IP addresses.

[TCPIP]
WINS_SERVER0 = 11 101 13 53
WINS_SERVER1 = 11 101 12 198

Name queries will be sent to the WINS servers in the order in which they appear in the .ini file. The ipconfig command may show a different order of WINS servers (or even different WINS servers altogether) —these are the WINS server names sent by DHCP, and the Protocol.ini settings override them.

Logging On with TCP/IP Across a Router
If the domain controller is across a router from the Microsoft Network Client for MS-DOS computer, you must add a line to the client's LMHOSTS file (located in the Net directory — if there is no LMHOSTS file, you need to create one) for logons to be validated. The line has the following format:

www.xxx.yyy.zzz SRV_NAME #DOMOM_NAME
where:

•www.xxx.yyy.zzz is the IP address of the domain controller.
•SRV_NAME is the NetBIOS name of the domain controller.
•DOM_NAME is the name of the domain.

You must also ensure that the domain controller can contact the Microsoft Network Client for MS-DOS using one of the following methods:

•Enter the client's IP address and name in the domain controller's LMHOSTS file.
•Register the client with a WINS server that is accessible by the domain controller (placing a static entry in WINS for the Microsoft Network Client for MS-DOS).

A kako ce pokrenuti instalaciju ako mu tastura ne radi a ne vjerujem da mu je first boot device usb mass storage ili network.

EDIT:Rijesio? Otkud znas?

Radi a ne radi. Ako ti bios to ne podrzava onda nemas izbora. Adapater USB na PS2 barem kad ti treba bios.

ALI TAJ ADAPTER JE OPET USB I OPET MI NECE RADIT!

 -udahni i skoncentriraj se...

-u BIOSu podesi podršku za USB tikpovnicu (kao DOS support ili legacy... ) ne kao first boot  i netreba nikakav adaper ili ostala kemijanja.

Ok, izgorio je... tough luck man! 

Aj ti fino napiši iz koje je godine matična, jer pobogu, danas bi svi BIOS-i po defaultu trebali raditi s USB tipkovnicama.

E, da ako komp reagira na del ili F2 i uđe u BIOS, onda mi nije jasno kako odjednom tamo ne radi.

za obrisati...

 prestani drkat i napravi nešto korsno.

nemam tako sta u biosu u tom i je problem!

Nekad neke USB tipkovnice jednostavno ne rade u DOS-u.

Napravi slijedeće: u BIOS-u u Boot Order stavi da je prvi boot device DVD/CD, a ostale stavi DISABLED. Postoji mogućnost da će ti u tom slučaju bootat CD bez potrebe da se stisne "any key". Naravno prilikom prvog restarta unutar instalacije moras promijeniti Boot device.