Dijeljenje skripti i konfiguracija

Čudi me da nemamo thread za dijeljenje skripti i konfiguracijske fileove. Pa evo ja ću započeti.

update.sh

Vrlo jednostavna skripta koja traži i instalira updateove. Kada se instalira skripta vi morate unijeti samo lozinku i stisnuti enter nakon pregleda updatea. Za Debian bazirane sustave.

#!/bin/bash
sudo apt-get update
sudo apt-get upgrade

update2.sh

Ista skripta kao gornja ali nemorate stisnuti enter nakon pregleda updateova:

#!/bin/bash
sudo apt-get update
sudo apt-get -y upgrade

Kasnije ih dodam još, ali dodavajte i vi svoje u međuvremenu.

 Bez obzira dali je neki repo online ili offline ova skripta nastavlja.

Ako imate tipkovnicu sa osvjetljenjem koja radi sa xset naredbom ova skripta, ako ju stavite u autorun pri loginu će vam paliti osvjetljenje tipkovnice na svakom loginu nakon 17:00 sati:

#!/bin/bash
time=$(date +%k%M)
if [[ "$time" -ge 1700 ]];then
xset led 3
echo "backlight on"
else
xset -led 3
echo "backlight not on"
fi

Ovo dalje u ovome postu je namijenjeno za i3wm korisnike:

Moj i3 config:

# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!

set $mod Mod4

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango:DejaVu Sans Mono 8
# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec i3-sensible-terminal

# kill focused window
bindsym $mod+Shift+q kill

# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+ccaron focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+ccaron move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
#turn on the keyboard backlight
bindsym $mod+x exec "xset led 3"
#apt get update and apt-get upgrade
bindsym $mod+u exec "gnome-terminal -e './update.sh'"

# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode

# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym ccaron resize grow width 10 px or 10 ppt

# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt

# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command i3status
position top
colors {
background #90C3D4
statusline #000000
separator #666666

focused_workspace #9993D4 #285577 #ffffff
active_workspace #333333 #5f676a #ffffff
inactive_workspace #333333 #222222 #888888
urgent_workspace #2f343a #900000 #ffffff
}
}
# Only hide window title on terminal windows
for_window [title="Terminal"] border pixel 1

exec --no-startup-id nm-applet
exec --no-startup-id ~/backlight.sh
exec --no-startup-id xrandr --output VGA1 --auto --left-of LVDS1 --output LVDS1 --scale 1.0001x1.0001
exec --no-startup-id ~/wallpaper.sh

Ova slijedeća skripta pomoću programa feh svakih 10 minuta mijenja wallpaper, nasumično odabran iz foldera ~/Pictures/Wallpapers, afaik radi sa i3wm-om i možda LXDE-om,openboxom i XFCE-om.

#!/bin/sh
while true; do
find ~/Pictures/Wallpapers -type f \( -name '*.jpg' -o -name '*.p$
shuf -n1 -z | xargs -0 feh --bg-scale
sleep 10m
done

Ovako izgleda moja i3status konfiguracija:

# i3status configuration file.
# see "man i3status" for documentation.
# It is important that this file is edited as UTF-8.
# The following line should contain a sharp s:
# ß
# If the above line is not correctly displayed, fix your editor first!
general {
colors = true
color_degraded = "#555555"
color_good = "#7C00A6"
# color_degraded= "#45005C"
interval = 5
}
order += "ipv6"
order += "disk /"
order += "run_watch DHCP"
order += "run_watch VPN"
order += "wireless _first_"
order += "ethernet _first_"
order += "battery 0"
order += "load"
order += "tztime local"
wireless _first_ {
format_up = "W: (%quality at %essid) %ip"
format_down = "W: down"
}
ethernet _first_ {
# if you use %speed, i3status requires root privileges
format_up = "E: %ip (%speed)"
format_down = "E: down"
}
battery 0 {
format = "%status %percentage %remaining"
}
run_watch DHCP {
pidfile = "/var/run/dhclient*.pid"
}
run_watch VPN {
pidfile = "/var/run/vpnc/pid"
}
tztime local {
format = "%Y-%m-%d %H:%M:%S"
}
load {
format = "%1min"
}
disk "/" {
format = "%avail"
}

Jednostavni snimač ekrana:

#!/bin/sh

PIDNAME=recorder
FRAMERATE=25
RES=$(wattr wh `lsw -r`| tr \ x)

usage(){
echo "usage: $(basename $0) [-fk] <filename>">&2
exit1
}

case $1 in
-f) FRAMERATE=50; shift 1;;
-k) kill $(pidof -s $PIDNAME);exit0;;
esac

test -n "$1"&& WEBM=$1 || usage

echo Framerate: $FRAMERATE
exec-a $PIDNAME ffmpeg -f x11grab -s $RES -an -r $FRAMERATE -i :0.0-c:v libvpx -b:v 5M-crf 10-quality realtime -y -loglevel quiet $1

Skripta za blokiranje stranica:

#!/bin/bash

if[[ $EUID -ne 0]];then
echo "Must run as root."
exit1
fi
block_sites="reddit.com tumblr.com huffingtonpost.com google.com"

unblock_sites(){
echo "unblocking sites"
mv /etc/hosts.bak /etc/hosts
}

block_sites(){
if[[!-f /etc/hosts.back ]];then
cp /etc/hosts /etc/hosts.bak ||(echo "Uh oh, error backing up /etc/hosts. Exiting.";exit1)
fi
for site in $block_sites;do
echo "blocking $site"
echo "0.0.0.0 $site">>/etc/hosts
done
}

if[[-n $1 ]];then
if[[ $1 == block ]];then
block_sites
elif[[ $1 == unblock ]];then
unblock_sites
fi
else
if[[-f /etc/hosts.bak ]];then
unblock_sites
else
block_sites
fi
fi