Linux - pitanja i odgovori
mislim da će ssh biti najbolje rješenje, nadam se samo da će šljakati kad računalo smrzne...
Hvala na info!
Poruka je uređivana zadnji put pon 25.8.2014 21:13 (skoosha).
Linux - pitanja i odgovori
- poruka: 20.145
- |
- čitano: 3.505.830
- |
- moderatori:
pirat, Lazarus Long, XXX-Man, vincimus
- +/- sve poruke
- ravni prikaz
- starije poruke gore
17 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
skoosha kaže...
Svaki puta bi nakon nekog vremena računalo ošlo offline s Team Viewera, a vidljiv je na mreži. Danas sam skužio da računalo jednostavno zablesira nakon nekog vremena i ne preostaje mi ništa drugo nego restart.
Može li se ikako saznati razlog tog smrzavanja i ako ne, postoji li neko rješenje za auto restart svakih nekoliko sati, jer ako nisam u firmi, a zablesira - ne mogu ništa do idući dan.
Kakav restart? Fizicki ili softverski? Jer, moze biti da se X izblesira, u tom slucaju konzola radi i ssh ce biti moguc. U suprotnom slucaju ssh mozes lagano zaboraviti.
Mozda se moze saznati, mozda ne moze. Sve ovisi sto pise u logovima. Naime, mozda se sve zblesira prije nego li sustav uspije upisati bilo sto u log. Najlakse ti je instalirati si gnome-system-log. To je aplikacija koja u grafickom sucelju prezentira sve logove tako da mozes lako proci kroz njih. Jako bi dobro bilo znati vrijeme kad se je racunalo izblesiralo, tako da lakse nades sumnjive unose u logovima.
Perhaps today IS a good day to die. PREPARE FOR RAMMING SPEED!
Re: Linux - pitanja i odgovori
Ima random freeze, nekad lupa po par sati, a nekad nakon 20 minuta....
Gledao sam malo po system logu, ali nažalost, ne kužim baš to previše....
Restart koji radim je fizički, zato što jednostavno miš / tipkovnica uopće ne reagiraju....
Isprobat ću SSH, nadam se da će išta biti od toga
17 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
skoosha kaže...
Ima random freeze, nekad lupa po par sati, a nekad nakon 20 minuta....
Gledao sam malo po system logu, ali nažalost, ne kužim baš to previše....
Restart koji radim je fizički, zato što jednostavno miš / tipkovnica uopće ne reagiraju....
Isprobat ću SSH, nadam se da će išta biti od toga
Zato ti velim, probaj skuziti kad se smrzne i onda odi u log, nadi unose oko tog vremena pa ih kopiraj ovdje, mozda ce netko skuziti ako ima kakva korisna informacija.
Perhaps today IS a good day to die. PREPARE FOR RAMMING SPEED!
Linux - pitanja i odgovori
pozdrav,evo treba mi hitno jedna preopruka-ima par dana kupio sam usb adapter od d-link-a i nažalost mi nije kompatibilan sa linux-om-pa me zanima koji je najbolji usb adapter-pošto ga namjeravam vratiti i uzeti novi-uzet ću u linksa-evo linka od adaptera pa može preopruka- links.hr link
Poruka je uređivana zadnji put sri 27.8.2014 9:35 (alexspalato).
16 godina
offline
Re: Linux - pitanja i odgovori
-kutija (ambalaža), uzmi neki na kojem vidiš pingvina, kernel +2.6... mora raditi outofbox. Drugi problem je što npr ubuntu izbacuje support za neki stariji HW, tako da ovisno o distri (što je uključeno ili isključeno) za ostale moraš imati driver, provjeri konkretne modele na str.proizvođača dali postoje driveri.
-svaki uređaj na svakom OSu treba driver, mada ponekad juzeri misle da radi samo od sebe...
C64/TurboModul-OpenSourceProject.org.cn.部分作品为网上收集整理，供开源爱好者学习使用
Re: Linux - pitanja i odgovori
ihush kaže...
-kutija (ambalaža), uzmi neki na kojem vidiš pingvina, kernel +2.6... mora raditi outofbox. Drugi problem je što npr ubuntu izbacuje support za neki stariji HW, tako da ovisno o distri (što je uključeno ili isključeno) za ostale moraš imati driver, provjeri konkretne modele na str.proizvođača dali postoje driveri.
-svaki uređaj na svakom OSu treba driver, mada ponekad juzeri misle da radi samo od sebe...
možeš mi preopručiti neke od ponuđenih šta sam ti stavio na ovom linku?
16 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
znam da dlink go usb n 150 ima
--------------------------------------------------------------------------------------------
17 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
alexspalato kaže...
ihush kaže...
-kutija (ambalaža), uzmi neki na kojem vidiš pingvina, kernel +2.6... mora raditi outofbox. Drugi problem je što npr ubuntu izbacuje support za neki stariji HW, tako da ovisno o distri (što je uključeno ili isključeno) za ostale moraš imati driver, provjeri konkretne modele na str.proizvođača dali postoje driveri.
-svaki uređaj na svakom OSu treba driver, mada ponekad juzeri misle da radi samo od sebe...
možeš mi preopručiti neke od ponuđenih šta sam ti stavio na ovom linku?
pogledaj pod WLAN http://wiki.open.hr/wiki/Hardver:Hardver
Life is too short to remove USB safely
Linux - pitanja i odgovori
Evo mene opet s mojim problemom.... Evo kopi - pejst loga:
Restart računala je u 12:53 (fizički - putem tipke), nakon zamrzavanja nemam pristup SSH:
Aug 28 11:25:02 debserver rtkit-daemon[3597]: Supervising 4 threads of 1 processes of 1 users.
Aug 28 11:25:03 debserver dbus[2427]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Aug 28 11:25:03 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.UDisks'
Aug 28 11:25:03 debserver dbus[2427]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Aug 28 11:25:03 debserver dbus[2427]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Aug 28 11:25:04 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 28 11:25:05 debserver dbus[2427]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Aug 28 11:25:05 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Aug 28 11:25:06 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 28 11:25:14 debserver rtkit-daemon[3597]: Successfully made thread 3728 of process 3728 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Aug 28 11:25:14 debserver rtkit-daemon[3597]: Supervising 5 threads of 2 processes of 1 users.
Aug 28 11:25:14 debserver pulseaudio[3728]: [pulseaudio] pid.c: Daemon already running.
Aug 28 11:25:15 debserver kernel: [ 71.262874] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug 28 11:25:27 debserver goa[3794]: goa-daemon version 3.4.2 starting [main.c:112, main()]
Aug 28 11:25:34 debserver spideroak_inotify[3806]: Program started
Aug 28 11:27:23 debserver minissdpd[3380]: 12 new devices added
Aug 28 11:28:54 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:28:55 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:28:56 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:28:56 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:28:57 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:28:57 debserver minissdpd[3380]: 1 new devices added
Aug 28 11:33:23 debserver minissdpd[3380]: 10 new devices added
Aug 28 11:33:48 debserver minissdpd[3380]: 12 devices removed (good-bye!)
Aug 28 12:05:16 debserver dbus[2427]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Aug 28 12:05:16 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 28 12:17:01 debserver /USR/SBIN/CRON[3996]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Aug 28 12:30:03 debserver dbus[2427]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Aug 28 12:30:03 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 28 12:43:54 debserver dbus[2427]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Aug 28 12:43:54 debserver dbus[2427]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 28 12:53:00 debserver kernel: imklog 5.8.11, log source = /proc/kmsg started.
Aug 28 12:53:00 debserver rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2181" x-info="http://www.rsyslog.com"] start
Aug 28 12:53:00 debserver kernel: [ 0.000000] Initializing cgroup subsys cpuset
Aug 28 12:53:00 debserver kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 28 12:53:00 debserver kernel: [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
17 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
skoosha kaže...
Evo mene opet s mojim problemom.... Evo kopi - pejst loga:
Restart računala je u 12:53 (fizički - putem tipke), nakon zamrzavanja nemam pristup SSH:
Ovdje nema niceg alarmantnog, bar ja ne vidim. Imas jos koji log?
Perhaps today IS a good day to die. PREPARE FOR RAMMING SPEED!
Poruka je uređivana zadnji put čet 28.8.2014 13:04 (1domagoj1).
Re: Linux - pitanja i odgovori
Evo auth.log:
Aug 28 12:43:59 debserver sshd[4087]: pam_winbind(sshd:auth): request wbcLogonUser failed: WBC_ERR_AUTH_ERROR, PAM error: PAM_USER_UNKNOWN (10), NTSTATUS: NT_STATUS_NO_SUCH_USER, Error message was: No such user
Aug 28 12:44:00 debserver sshd[4089]: Invalid user admin from 116.10.191.202
Aug 28 12:44:00 debserver sshd[4089]: input_userauth_request: invalid user admin [preauth]
Aug 28 12:44:00 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:00 debserver sshd[4089]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=116.10.191.202
Aug 28 12:44:00 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:00 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:01 debserver sshd[4087]: Failed password for root from 116.10.191.202 port 56460 ssh2
Aug 28 12:44:02 debserver sshd[4087]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:02 debserver sshd[4087]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:02 debserver sshd[4087]: pam_winbind(sshd:auth): request wbcLogonUser failed: WBC_ERR_AUTH_ERROR, PAM error: PAM_USER_UNKNOWN (10), NTSTATUS: NT_STATUS_NO_SUCH_USER, Error message was: No such user
Aug 28 12:44:03 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:03 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:03 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:03 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:04 debserver sshd[4087]: Failed password for root from 116.10.191.202 port 56460 ssh2
Aug 28 12:44:04 debserver sshd[4087]: Disconnecting: Too many authentication failures for root [preauth]
Aug 28 12:44:04 debserver sshd[4087]: PAM 5 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=116.10.191.202 user=root
Aug 28 12:44:04 debserver sshd[4087]: PAM service(sshd) ignoring max retries; 6 > 3
Aug 28 12:44:05 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:06 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:06 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:06 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:08 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:08 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:08 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:08 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:10 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:10 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:10 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:10 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:11 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:12 debserver sshd[4089]: pam_unix(sshd:auth): check pass; user unknown
Aug 28 12:44:12 debserver sshd[4089]: pam_winbind(sshd:auth): getting password (0x00000388)
Aug 28 12:44:12 debserver sshd[4089]: pam_winbind(sshd:auth): pam_get_item returned a password
Aug 28 12:44:14 debserver sshd[4089]: Failed password for invalid user admin from 116.10.191.202 port 2884 ssh2
Aug 28 12:44:14 debserver sshd[4089]: Disconnecting: Too many authentication failures for admin [preauth]
Aug 28 12:44:14 debserver sshd[4089]: PAM 5 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=116.10.191.202
Aug 28 12:44:14 debserver sshd[4089]: PAM service(sshd) ignoring max retries; 6 > 3
Aug 28 12:44:15 debserver sshd[4101]: fatal: Write failed: Connection reset by peer [preauth]
Aug 28 12:53:05 debserver sshd[2481]: Server listening on 0.0.0.0 port 22.
Aug 28 12:53:05 debserver sshd[2481]: Server listening on :: port 22.
Aug 28 12:53:16 debserver sshd[2481]: Received signal 15; terminating.
Aug 28 12:53:16 debserver sshd[2980]: Server listening on 0.0.0.0 port 22.
Aug 28 12:53:16 debserver sshd[2980]: Server listening on :: port 22.
Evo i sys.log kod startupa, kroz search sam nasao neke errore:
Aug 28 13:44:51 debserver kernel: [ 2.479620] sr 0:0:1:0: Attached scsi CD-ROM sr0
Aug 28 13:44:51 debserver kernel: [ 2.500075] sda: sda1 sda2 < sda5 >
Aug 28 13:44:51 debserver kernel: [ 2.500415] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 28 13:44:51 debserver kernel: [ 2.502532] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 28 13:44:51 debserver kernel: [ 2.502684] sr 0:0:1:0: Attached scsi generic sg1 type 5
Aug 28 13:44:51 debserver kernel: [ 3.194996] PM: Starting manual resume from disk
Aug 28 13:44:51 debserver kernel: [ 3.195000] PM: Hibernation image partition 8:5 present
Aug 28 13:44:51 debserver kernel: [ 3.195002] PM: Looking for hibernation image.
Aug 28 13:44:51 debserver kernel: [ 3.213233] PM: Image not found (code -22)
Aug 28 13:44:51 debserver kernel: [ 3.213236] PM: Hibernation image not present or could not be loaded.
Aug 28 13:44:51 debserver kernel: [ 3.223227] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
Aug 28 13:44:51 debserver kernel: [ 3.223231] EXT4-fs (sda1): write access will be enabled during recovery
Aug 28 13:44:51 debserver kernel: [ 3.276727] scsi 6:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 ANSI: 2
Aug 28 13:44:51 debserver kernel: [ 3.277285] sd 6:0:0:0: Attached scsi generic sg2 type 0
Aug 28 13:44:51 debserver kernel: [ 3.279150] sd 6:0:0:0: [sdb] 3969022 512-byte logical blocks: (2.03 GB/1.89 GiB)
Aug 28 13:44:51 debserver kernel: [ 3.279587] sd 6:0:0:0: [sdb] Write Protect is off
Aug 28 13:44:51 debserver kernel: [ 3.279590] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Aug 28 13:44:51 debserver kernel: [ 3.280086] sd 6:0:0:0: [sdb] No Caching mode page found
Aug 28 13:44:51 debserver kernel: [ 3.280124] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Aug 28 13:44:51 debserver kernel: [ 3.282717] sd 6:0:0:0: [sdb] No Caching mode page found
Aug 28 13:44:51 debserver kernel: [ 3.282752] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Aug 28 13:44:51 debserver kernel: [ 3.433836] sdb: sdb1
Aug 28 13:44:51 debserver kernel: [ 3.435838] sd 6:0:0:0: [sdb] No Caching mode page found
Aug 28 13:44:51 debserver kernel: [ 3.435889] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Aug 28 13:44:51 debserver kernel: [ 3.435921] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Aug 28 13:44:51 debserver kernel: [ 4.276800] EXT4-fs (sda1): orphan cleanup on readonly fs
Aug 28 13:44:51 debserver kernel: [ 4.276809] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063259
Aug 28 13:44:51 debserver kernel: [ 4.276897] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063274
Aug 28 13:44:51 debserver kernel: [ 4.276935] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360130
Aug 28 13:44:51 debserver kernel: [ 4.276949] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360129
Aug 28 13:44:51 debserver kernel: [ 4.276971] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360110
Aug 28 13:44:51 debserver kernel: [ 4.276984] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360126
Aug 28 13:44:51 debserver kernel: [ 4.277015] EXT4-fs (sda1): 6 orphan inodes deleted
Aug 28 13:44:51 debserver kernel: [ 4.277017] EXT4-fs (sda1): recovery complete
Aug 28 13:44:51 debserver kernel: [ 4.396146] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 13:44:51 debserver kernel: [ 7.381020] wmi: Mapper loaded
Aug 28 13:44:51 debserver kernel: [ 7.556591] input: PC Speaker as /devices/platform/pcspkr/input/input0
Aug 28 13:44:51 debserver kernel: [ 7.566359] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 28 13:44:51 debserver kernel: [ 7.566367] ACPI: Power Button [PWRB]
Aug 28 13:44:51 debserver kernel: [ 7.566440] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 28 13:44:51 debserver kernel: [ 7.566443] ACPI: Power Button [PWRF]
Aug 28 13:44:51 debserver kernel: [ 7.774853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 28 13:44:51 debserver kernel: [ 8.046264] powernow-k8: Found 1 AMD Phenom(tm) 9500 Quad-Core Processor (4 cpu cores) (version 2.20.00)
Aug 28 13:44:51 debserver kernel: [ 8.046308] powernow-k8: 0 : pstate 0 (2100 MHz)
Aug 28 13:44:51 debserver kernel: [ 8.046310] powernow-k8: 1 : pstate 1 (1100 MHz)
Aug 28 13:44:51 debserver kernel: [ 8.051819] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
Aug 28 13:44:51 debserver kernel: [ 8.051824] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 28 13:44:51 debserver kernel: [ 8.057843] parport_pc 00:0a: reported by Plug and Play ACPI
Aug 28 13:44:51 debserver kernel: [ 8.057898] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Aug 28 13:44:51 debserver kernel: [ 8.234913] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
Aug 28 13:44:51 debserver kernel: [ 8.235037] SP5100 TCO timer: mmio address 0xfec000f0 already in use
Aug 28 13:44:51 debserver kernel: [ 8.243019] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
Aug 28 13:44:51 debserver kernel: [ 8.313487] [drm] Initialized drm 1.1.0 20060810
Aug 28 13:44:51 debserver kernel: [ 8.454027] [drm] radeon kernel modesetting enabled.
Aug 28 13:44:51 debserver kernel: [ 8.465789] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
Aug 28 13:44:51 debserver kernel: [ 8.585077] snd_hda_intel 0000:01:05.1: setting latency timer to 64
Aug 28 13:44:51 debserver kernel: [ 11.439809] Adding 3211260k swap on /dev/sda5. Priority:-1 extents:1 across:3211260k
Aug 28 13:44:51 debserver kernel: [ 11.465469] EXT4-fs (sda1): re-mounted. Opts: (null)
Aug 28 13:44:51 debserver kernel: [ 11.816415] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Aug 28 13:44:51 debserver kernel: [ 12.026289] loop: module loaded
Aug 28 13:44:51 debserver kernel: [ 13.822413] RPC: Registered named UNIX socket transport module.
Aug 28 13:44:51 debserver kernel: [ 13.822419] RPC: Registered udp transport module.
Aug 28 13:44:51 debserver kernel: [ 13.822423] RPC: Registered tcp transport module.
Aug 28 13:44:51 debserver kernel: [ 13.822426] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 28 13:44:51 debserver kernel: [ 13.905712] FS-Cache: Loaded
Aug 28 13:44:51 debserver kernel: [ 13.948642] FS-Cache: Netfs 'nfs' registered for caching
Aug 28 13:44:51 debserver kernel: [ 13.985519] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Poruka je uređivana zadnji put čet 28.8.2014 13:49 (skoosha).
17 godina
offline
Linux - pitanja i odgovori
Hmm, moglo bi biti do opensource radeon drivera u tom starom kernelu. Probaj staviti noviji kernel. U vrijeme 3.2 kernela FOSS driver je bio doooosta lošiji nego sada. U backportsima imaš 3.12, 3.13, 3.14.
Poruka je uređivana zadnji put čet 28.8.2014 15:54 (josipva).
13 godina
neaktivan
offline
Linux - pitanja i odgovori
Probaj blacklist napravit za taj fail (/etc/modprobe.d/blacklist.conf)
[code]blacklist piix4_smbus
blacklist sp5100_tco
blacklist SP5100
blacklist k10temp[/code]
Reboot na init 4 (5) pa Xorg.log postaj
[code]cat /var/log/Xorg.0.log |grep fail[/code]
Za "Failed password" prob instaliraj fail2ban i promijeni port za ssh.
dd if=/dev/zero of=/dev/sda bs=512 count=62 seek=1
Linux - pitanja i odgovori
Instalirao sam novi kernel, no nekog pomaka i dalje nema...
Malo prije uopće nisam mogao u desktop (nakon sto je odradio par sati) te ni jedan service nije radio. Tek nakon restarta gnome-a, proradilo je sve ispočetka, no nakon toga me izbacio i iz SSH i iz svega, pa sam morao na restart:
Evo i sys.log:
Aug 29 10:17:01 debserver /USR/SBIN/CRON[4602]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Aug 29 11:03:07 debserver kernel: [ 7463.113197] pulseaudio[3966]: segfault at 86 ip b76f24d2 sp bfe7a390 error 4 in ld-2.13.so[b76e4000+1c000]
Aug 29 11:03:07 debserver x-session-manager[3364]: Gdk-WARNING: x-session-manager: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.#012
Aug 29 11:03:08 debserver kernel: [ 7463.678866] SpiderOak[4089]: segfault at 3099b9b ip b51302ec sp bfc687a0 error 6 in libX11.so.6.3.0[b50f1000+134000]
Aug 29 11:03:08 debserver kernel: [ 7463.908399] mtrr: no MTRR for d0000000,10000000 found
Aug 29 11:03:09 debserver acpid: client 3030[0:0] has disconnected
Aug 29 11:03:09 debserver acpid: client connected from 5210[0:0]
Aug 29 11:03:09 debserver acpid: 1 client rule loaded
Aug 29 11:03:09 debserver spideroak_inotify[4173]: Parent process gone: stopping
Aug 29 11:03:09 debserver spideroak_inotify[4173]: Program terminates normally
Aug 29 11:03:14 debserver x-session-manager[5240]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Successfully made thread 5318 of process 5318 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Supervising 1 threads of 1 processes of 1 users.
Aug 29 11:03:16 debserver pulseaudio[5318]: [pulseaudio] pid.c: Stale PID file, overwriting.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Successfully made thread 5319 of process 5318 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Supervising 2 threads of 1 processes of 1 users.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Successfully made thread 5320 of process 5318 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Supervising 3 threads of 1 processes of 1 users.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Successfully made thread 5321 of process 5318 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Aug 29 11:03:16 debserver rtkit-daemon[3968]: Supervising 4 threads of 1 processes of 1 users.
Aug 29 11:03:17 debserver dbus[2795]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Aug 29 11:03:18 debserver dbus[2795]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 29 11:03:18 debserver rtkit-daemon[3968]: Successfully made thread 5365 of process 5365 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Aug 29 11:03:18 debserver rtkit-daemon[3968]: Supervising 5 threads of 2 processes of 1 users.
Aug 29 11:03:18 debserver pulseaudio[5365]: [pulseaudio] pid.c: Daemon already running.
Aug 29 11:03:27 debserver goa[5415]: goa-daemon version 3.4.2 starting [main.c:112, main()]
Aug 29 11:03:31 debserver spideroak_inotify[5424]: Program started
Što se tiče savjeta 2:
Dodao sam u blacklist.conf, no nažalost daljni korak oko restarta nisam napravio (ne znam kako), ali nakon nekoliko rebootova, evo xorg log:
(nisam znao koji dio uzeti, pa sam uzeo cijeli)
https://www.dropbox.com/s/ubmdjy55qdk3liy/xorg.txt?dl=0
Hvala svima!
*edit* prije sam imao neke errore kod software update, sad sam ponovno pokrenuo, sad sljaka, mozda ode na bolje...
Poruka je uređivana zadnji put pet 29.8.2014 11:41 (skoosha).
17 godina
offline
Linux - pitanja i odgovori
Ja i nemam baš više ideja. Da nije možda do hardware-a (RAM?). Evo usput i ovo ako išta pomaže.
Re: Linux - pitanja i odgovori
Pokrenuo sam ramtest preko Hirena, sve je u redu, kao i sa HDDom...
Ako ništa ne uspije, probat ću reinstall, hvala na pomoći!
16 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
skoosha kaže...
Aug 28 13:44:51 debserver kernel: [ 8.313487] [drm] Initialized drm 1.1.0 20060810
Aug 28 13:44:51 debserver kernel: [ 8.454027] [drm] radeon kernel modesetting enabled.
Aug 28 13:44:51 debserver kernel: [ 8.465789] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
Instaliraj mikrokod (firmware) za grafičku karticu - paket firmware-linux-nonfree. Prvenstveno, nedostatak firmwarea uzrokuje slabe 2D i 3D performanse jer nema nikakve akceleracije - moguće je da nedostatak ima za posljedicu i nestabilnost u radu.
Firmware je uklonjen iz Debianovog kernela (od 2.6.29-1) zato što krši Debian Free Software Guidelines. Uputstva za provjeru je li mikrokod u upotrebi su ovdje.
It doesnt matter how beautiful your theory is, it doesnt matter how smart you are. If it doesnt agree with experiment, its wrong. - Richard P. Feynman
Poruka je uređivana zadnji put pet 29.8.2014 19:50 (hrx).
13 godina
neaktivan
offline
Linux - pitanja i odgovori
cat /tmp/xorg.txt |grep fail
[ 29.080] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[ 29.638] (EE) RADEON(0): Acceleration initialization failed
Znaci da ti accelerator ne dela, trebas xorg.conf i driver. radeon ili fglrx.
pulseaudio[3966]: segfault
^ Najbolje pitat nekog iz debian ekipe, ja sam na slackware 14 kde, nemam pulse/gnome/std.
Inace, kad instaliras novi sustav, prvo ghost image napravis ili dd na externi disk.
Onda kasnije precrtas particiju u roku 5 minuta ako bude problem.
dd if=/dev/zero of=/dev/sda bs=512 count=62 seek=1
17 godina
neaktivan
offline
Linux - pitanja i odgovori
tko želi upgradedat svoj kubuntu na 14.10 beta 1 sa plasma 5 preview
sudo kubuntu-devel-release-upgrade
http://www.kubuntu.org/news/14.10-beta-1
*i ako ste se pitali na čemu je baziran COS (china operating sytem) kojeg planiraju uvesti u državnu upravu umjesto Windowsa, odgovor je Linux
http://thevarguy.com/open-source-application-software-companies/082814/china-promotes-linux-based-operating-system-against-windo
Life is too short to remove USB safely
Poruka je uređivana zadnji put sub 30.8.2014 0:44 (hrvooje).
Re: Linux - pitanja i odgovori
hrx kaže...
skoosha kaže...
Aug 28 13:44:51 debserver kernel: [ 8.313487] [drm] Initialized drm 1.1.0 20060810
Aug 28 13:44:51 debserver kernel: [ 8.454027] [drm] radeon kernel modesetting enabled.
Aug 28 13:44:51 debserver kernel: [ 8.465789] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree.
Instaliraj mikrokod (firmware) za grafičku karticu - paket firmware-linux-nonfree. Prvenstveno, nedostatak firmwarea uzrokuje slabe 2D i 3D performanse jer nema nikakve akceleracije - moguće je da nedostatak ima za posljedicu i nestabilnost u radu.
Firmware je uklonjen iz Debianovog kernela (od 2.6.29-1) zato što krši Debian Free Software Guidelines. Uputstva za provjeru je li mikrokod u upotrebi su ovdje.
Hvala na ovome, instalirano, sad vidim neko fensi sucelje. Jos sam instalirao i firmware-realtek jer mi je uporno javljao da mu fale neki fajlovi, pa cemo vidjeti dalje kako se sistem ponaša.
Hvala svima!
*edit* dva restarta u dva sata >.<... samo odjednom Team Viewer krepa, a ni pristupa SSH nema... stavio sam schedule u cron restart svaka 2 sata... kilavo rješenje ali dok ne nadjem bolje, posluziti ce
Poruka je uređivana zadnji put sub 30.8.2014 9:43 (skoosha).
17 godina
neaktivan
offline
Linux - pitanja i odgovori
Linus o neuspješnosti linux distribucija na desktopu. Čak ni on za svoju aplikaciju o ronjenju ne radi binarne fileove
“One of the things that none of the distributions have ever got right is application packaging.” He said that it’s not about rpm vs deb packaging. “I am talking about actual application writers that want to make a package of their application for Linux.”
Linus himself is involved with one such projects – Subsurface (a dive log) – and he said, “We make binaries for windows and OSX, we basically don’t make binaries for Linux. Why? Because making binaries for Linux Desktop applications is a major fuc***g pain in the ass. You don’t make binaries for Linux, you make binaries for Fedora 19, Fedora 20 may be there is even RHEL 5 from 10 years ago.”
Life is too short to remove USB safely
Poruka je uređivana zadnji put čet 4.9.2014 18:08 (hrvooje).
17 godina
offline
Re: Linux - pitanja i odgovori
A u određenom dijelu ima smisla, no ako je aplikacija open source i bar nešto popularna ne trebaju se ni misliti oko toga. Svaka veća distribucija ima svoje package maintainere koji će obaviti taj posao. Problem je više izražen ako nije open source.
Poruka je uređivana zadnji put čet 4.9.2014 18:17 (josipva).
17 godina
neaktivan
offline
Linux - pitanja i odgovori
Većina aplikacija nije open source. Ima ih dosta besplatnih.
Life is too short to remove USB safely
17 godina
neaktivan
offline
Linux - pitanja i odgovori
Svjetski poznati Linux bloger dedoimedo, smucao se ovo ljeto izgleda po hrvatskoj
Life is too short to remove USB safely
17 godina
offline
Re: Linux - pitanja i odgovori
hrvooje kaže...
Svjetski poznati Linux bloger dedoimedo, smucao se ovo ljeto izgleda po hrvatskoj
Moguce da je hrvat, zove se Igor Ljubuncic...
Poruka je uređivana zadnji put ned 7.9.2014 22:13 (josipva).
15 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
Dedo i Medo nick, paaa, garant je s ovih prostora onda. :D
Optimizam je nedostatak iskustva.
Linux - pitanja i odgovori
Pozz ljudi!
Imam problem sa instalacijom Fedore. Napravio sam live usb sa LiLi Creator-om i kad pokrenem instalaciju preko usb-a javlja grešku da nema kernela na usb-u, a skinuto sa služeben stranice. Ako netko zna riješenje, unaprije hvala.
16 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
Iz osobnog iskustva, ISO image sa službene stranice i Unetbootin rade bez problema.
It doesnt matter how beautiful your theory is, it doesnt matter how smart you are. If it doesnt agree with experiment, its wrong. - Richard P. Feynman
Poruka je uređivana zadnji put ned 7.9.2014 23:10 (hrx).
16 godina
neaktivan
offline
Re: Linux - pitanja i odgovori
dell_optimist kaže...
Pozz ljudi!
Imam problem sa instalacijom Fedore. Napravio sam live usb sa LiLi Creator-om i kad pokrenem instalaciju preko usb-a javlja grešku da nema kernela na usb-u, a skinuto sa služeben stranice. Ako netko zna riješenje, unaprije hvala.
Formatiraj stick na FAT32
--------------------------------------------------------------------------------------------